Sheeting
Overview
- Sheeting (Unprinted Sheets) can be calculated from Sheets or from Reels.
- The Work Size and Max Size are set to the Part Size.
- When using Reels, the Sheet Depth assumes the Work Depth.
- When Ink = Not Printed, the following happens:
- Bleed is hidden on Parts. (Bleed is also cleared by default.)
- The Press and Running Options have limited fields for Min/Max size, Setup Time and Speed.
Setting Up
Printing Types
| Field | Description |
|---|---|
| Description | Sheeting (can be anything) |
| Size from | Part |
| Run Type | Sheetfed - Sheets/hr; Web - m/hr; Web - Sheets/hr |
| Ink | Not Printed |
| Substrate Category | Select a Material Category – Sheets or Reels. |
Set up a Press (e.g. Guillotine) for sheeting from a Reel or cutting to size from a stock sheet.
Sheeting (Sheet to Sheet)
- In this model, we assume you are guillotining a big sheet down to smaller sheets.
- Require Max Depth and Width.
Sheeting (Reel to Sheet)
- In this model, we assume you are sheeting a Jumbo Reel one across and the Width of the Reel becomes the Width of the Cut Sheet.
- Require Max Depth and Width.